Forums › Clothing, Soft Goods, and Accessories › jackets… Different Levels of Waterproofness and Breathability
- This topic has 3 replies, 2 voices, and was last updated 15 years, 2 months ago by Frosty.
-
AuthorPosts
-
September 1, 2009 at 9:17 am #307
im planning to buy new jacket but could anyone tell me which is better (breathable rating:20000g, waterproof:20k) and (breathable rating:5000g, waterproof:5k)…. is it a big difference???
September 1, 2009 at 2:23 pm #3449Good question. Without getting too technical, both garments are “waterproof/breathable” and for casual usage would not appear to be too different; however under more intense conditions (internally via sweat or externally via snow/rain) you would most likely notice a difference. Waterproof/breathable fabrics resist droplets or water from passing (outside-in) while allowing water vapor through (inside-out). Typical mid-range fabrics tend to have values of 5,000g of breathability and 5,000mm of water resistance. From this we can determine that the first fabric you mention (breathable rating:20,000g, waterproof rating: 20,000mm) is a very aggressive claim of very high waterproofing and breathability combined and I would assume it is higGood question. Without getting too technical, both garments are “waterproof/breathable” and for casual usage would not appear to be too different; however under more intense conditions (internally via sweat or externally via snow/rain) you would most likely notice a difference. Waterproof/breathable fabrics resist droplets or water from passing (outside-in) while allowing water vapor through (inside-out). Typical mid-range fabrics tend to have values of 5,000g of breathability and 5,000mm of water resistance. From this we can determine that the first fabric you mention (breathable rating:20,000g, waterproof rating: 20,000mm) is a very aggressive claim of very high waterproofing and breathability combined and I would assume it is high end material.Your latter-mentioned fabric (breathable rating: 5,000g, waterproof rating: 5,000mm) fits right in the mid-range. I would assume it is a mid-end material.Does this mean that the higher end material is better for you? Not necessarily. There are many other factors that should be considered such as intended climate, quality of construction, care requirements, warranty, and price.September 3, 2009 at 9:09 am #3450thank frosty. For a usual condition, would the first fabric be too much? i mean will sweat a lot (very hot). in case of products, these two are that im thinking to buy: Burton 2L Gore-Tex Shelter Jacket, Burton Poacher Jacket.. which is better??? i mean will not be shaking of cold and sweating like hellhere are the adressses for these two products:http://www.backcountry.com/outdoorgear/BUR2194/Burton-Poacher-Jacket-Mens.htmlhttp://www.backcountry.com/outdoorgear/BUR2182/Burton-2L-Gore-Tex-Shelter-Jacket-Mens.html
September 3, 2009 at 3:07 pm #3451The cheaper jacket (Poacher) is still a decent coat. Burton uses great materials for their outerwear. It is a mid-level garment so I don't think it would necessarily prevent you from breathing properly unless you were doing serious mountaineering or something like that.
-
AuthorPosts
- You must be logged in to reply to this topic.