Bindings come in two parts. One is the major binding part and the other is the center disk that the binding screws get put through (on the base plate). That is the part we are concerned with. The disks come in three types based on the hole patterns they accommodate: A) 4-hole pattern (most common)B) 3-hole pattern (for burton boards' proprietary hole pattern)C) Universal (not very common)Some bindings come with 3-hole or 4-hole disks. Some come with both.So in your case, if you were using your Burton bindings on a different board that has a 4-hole pattern then you most likely have the 4-hole disk in there. If you want to use you Burton bindings with a Burton board, you would need teh 3-hole disks in there.
